Sprayway

Sprayway
$315.99
A portable source of ultra-clean gas for precision removal of dirt, lint and other particulates. This product is non-flammable, ultra-filtered dust remover with pinpoint jet accuracy delivering a blast or air up to 100 psi at 68°F and is guaranteed to leave no residue on any surface being cleaned. Use for cleaning small, delicate and tight areas found in office & computer equipment, circuits, electronic devices, audio/visual equipment, photographic, x-ray film and equipment, laboratory equipment, sewing machines and equipment and other places that are hard to reach. Extender tube for pin-point accuracy.

$275.99
A high purity, high dielectric, rapidly evaporating, non-flammable aerosol spray, contact and circuit board cleaner. Specially formulated for removing oil, grease, condensation, dust and other particulate matter from sensitive electronic parts. Quick drying formula will not harm most plastics, paints or rubbers. This solvent system has tested safe on: neoprene, buna, silicone, butyl and natural rubber, nylon, hypalon®, PTFE, PVC, polyurethane, polyethylene, polypropylene and epoxy. Use on circuit boards, wire terminals, relays, switches, contacts, circuit breakers, tuners, potentiometers, cable ends and receptacles, control panels, and other electronic equipment.

$183.99
A high pressure, moisture-free gas for removing microscopic dirt, dust, lint, iron oxide deposits, and paper that normal hand dusting cannot reach. Attach tube to reach remote cracks and crevices. Plastic safe, non-abrasive and leaves no residue. Safe on sensitive components and most finishes. Use on computer printers, fax machines, copiers, scientific equipment, disk drives & cartridges, timing devices, electromagnetic devices, magnetic tape, heads and card strip pickup units, optical pickups, clean rooms, data processing, electronics, photographic laboratories, and automotive. Features a finger friendly trigger which eliminates finger chill and fatigue. NOTE: Do not use on camera mirrors.

$173.99
Industrial strength, natural citrus degreaser and deodorant. No chlorinated solvents or petroleum distillates. The safest alternative to using chlorinated solvents for degreasing metal surfaces. Heavy flushing action quickly dissolves and removes grease, grime and oil. High pressure spray penetrates, loosens and lifts soil away. Parts can air dry leaving negligible residue, or be rinsed clean with water. For use on auto motors, garbage cans, trucks, dumpsters, concrete, masonry, road, farm and construction equipment to remove grease and grime.

$168.99
A contact adhesive designed for bonding vinyl tops, heavyweight headliners and hood silencer pads where high strength and heat resistance are needed. It features a high immediate bond strength with a non-misting, lace-like spray. The spray easily bonds foam, headliners and insulation materials to metal, wood and plastic.

$160.99
Removes grease, dirt, oil, printing ink, tar, grime, adhesive, and resins from energized electrical equipment. Will not harm most metals and painted surfaces. Electric motors and generators may be cleaned while in use, when used in properly ventilated areas. Energized Equipment use only. Not to be used for motorized vehicle maintenance, or their parts. Use on air compressors, alternators, generators, electric motors, power tools and other electrical equipment. NOTE: Do not use on plastics.

$141.99
Contains pure Molybdenum Disulfide micro-particles which burnish themselves into metal surfaces and provide a bonded dry lubricating film. Temperature ranges from -78°C to +565°C (-110°F to +1050°F). Resists pressures up to 100,000 psi. Used in oil drilling, foundries, automotive plants, vehicle maintenance, sewing trades, paper and corrugated converting, chemical plants, woodworking, marine, agricultural & military equipment, road equipment, aircraft maintenance, steel mills and mining operations. Lubricates construction and other heavy equipment. May be applied wherever petroleum or synthetic lubricants are not suitable (except oxygen systems). WHMIS labeled for sale in Canada.

$135.99
Silicone spray retards corrosion. Makes cleaning easier and quicker. Dries fast with no greasy or oily film. It saves valuable time while it protects and preserves equipment. Colorless, non-staining, waxless and heatstable-unaffected by temperatures ranging from -40°C to 204°C. It has unusually low surface tension properties. Furniture/Auto Trim/Upholstery: Stops the adhesion of urethane foam backings, foam rubber and other nonsliding materials to metal, wood or rubber. Printers: Prevents rust on paper cutters, drills, dies, saws, etc. Prevents the adhesion of glue to equipment. Hardware/Industrial Maintenance: Eliminates sticking problems in plastic and rubber molding. Helps fight rust on tools and equipment. Prevents adhesion of sticky materials to equipment.

$135.99
Heavy duty, non-chlorinated degreaser. Effective for removal of grease, oil, ink, adhesive, tar, wax, exhaust fume residue, resins and certain graffiti. Use this product to replace products containing butyl cellosolve and chlorinated solvents, such as trichloroethylene.

$133.99
A high performance mist adhesive used for both temporary and permanent bonds. It is a versatile general purpose adhesive ideal for use in packaging, lightweight bonding and fabricating, labeling and shipping applications. Its non-staining formula makes it ideal for use on many substrates, such as: Wood to acrylics, paper/cardboard, fabric and felt. Metal to acrylics, paper/cardboard, fabric and felt. Rubber to acrylics, nylon, fabric and felt. Paper to paper/cardboard, fabric and felt.

$132.99
This non-oily, non-staining woodworker's lubricant remains dry during use. Extremely slick, T1 will not melt below 500°F, will not attract or hold dust or dirt and will not become gummy. Repels oil and water. Fortified with TFE. Reduces friction - stops sticking. Paintable - will not affect wood finish. Inhibits resin build-up while it prolongs tool life. Dry coating lubricant for use on: saw blades, planers, router bits, drill bits, shapers, table tops. Use as a release agent for rubber, epoxy, phenolic, polyester and other resins.

$132.99
A super tough coating containing pure stainless steel pigment in an ultra durable resin system. Seals, beautifies and protects metal, wood, ceramics and more. Helps prevent deterioration caused by harsh chemicals, severe atmospheres or conditions. Tack Free in 5 Minutes - Hard Cure in 2 hours. Metallic coatings (mcp) does not exceed 1.90 Mir. Use on radiators, steam pipes, fire hydrants, exhausts, mufflers, parking meters, chain and wire fences, boilers, engines, grills, lockers, heat exchangers, ovens, storage and mixing tanks, chemical processing and production equipment, vehicle maintenance, hvac trades, marine, agricultural and military equipment, road equipment, oil drilling equipment, aircraft maintenance, restaurant equipment.